After-sales service
if there is any questions pls feel free to contact us .we are here to help in any way we can .thank you .
Answer the questions:
1 , about Matsutec AR-10 or AR-12:
a:Choose the correct COM port on the software, and Baud rate:38400, install AR-10 or AR-12 USB driver.
b:is this Compatible with TelChart V3 ? yes, Compatible.
c:Link DB9
wire DB9
Blue ---- PIN 2
Brown --- PIN 5
2 ,about Matsutec HA-102:
Link problems, for example:
Garmin 54cv ,1 por :NMEA0183 internal por RX(in) to link HA-102 ,5 por:SG Brown
Garmin 54cv ,2 por :NMEA0183 internal por TX(OUT) to link HA-102 ,6 por:SD2 Orange NMEA RS232 AIS output
3，about Matsutec HAB-120, HAB-120S, HAB-150, HAB-150S
Note:
The initial password is 8888.
You can change the password. Please refer to chapter 2.9 Set New Password.
Instructions for Matsutec AIS HAB-120 Config
Driver installed, unable to connect HAB-120 or HAB-120, The following solutions can be tried:
about HAB-120 Win10 Install Method
4,about HA-017M:
It can supply 12 VDC.
Red and black Link power , green and white link RS232, green TX+, white TX-
4,about HA-102:
Turn off the alarm and press the red button